Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Thu Mar 28, 2024 4:55 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 22 posts ]  Go to page 1, 2  Next
Author Message
Jim Mantyla
 Post subject: Cowling Modifications
PostPosted: Tue Nov 02, 2010 12:22 pm 
Sr. Member
Sr. Member

Joined: Wed Oct 21, 2009 6:57 pm
Posts: 227
Location: Barrie, Ontario,Canada
Guys,

I was reading Lee's comments on the speed thread and it was mentioned that he worked on tightening up the baffles and the cowl where the exhaust was to gain 10-15 mph. I was wondering if any one else has modified their cowls with respect to air inlet area, shape, etc? Also is there much difference between the various cowl types with respect to speed capabilities? My plane is down for the winter and this would be the time to make changes.

Your thoughts/ suggestions??( I have the Ratray cowl)

Jim Mantyla


Last edited by Anonymous on Tue Nov 02, 2010 12:22 pm, edited 1 time in total.

Top
 Profile  
 
118JM
 Post subject: Cowling Modifications
PostPosted: Tue Nov 30, 2010 7:21 pm 
Newbie
Newbie

Joined: Mon Jul 19, 2010 8:41 pm
Posts: 2
Location: USA
There is one heck of a difference.. the ratray cowl is a pice of s*^$!!! I have it on mt project, and the first thing I did was cut the fiberglass flange area out and radius the inlets.. you can minimalize it 20% for drag effect and gain a good 5 mph... suggest change your baffling if its old as well... I'll post a few pics of mine... getting close to hanging the wings for good and taking it to the airport!!

Jeff Maynard
SN 510 N118JM


Last edited by admin on Tue Nov 30, 2010 7:21 pm, edited 1 time in total.

Top
 Profile  
 
qjayz
 Post subject: Cowling Modifications
PostPosted: Tue Nov 30, 2010 10:23 pm 
Newbie
Newbie

Joined: Sun Jul 11, 2010 6:08 pm
Posts: 9
Location: USA
I was wondering how the classic t-18 cowling stacks up as far as drag, and what the current cowling options are (Im trying to decide what to put on my airplane).

_________________
Quincy Zlotnick
Sebastopol CA
plans #576


Last edited by admin on Tue Nov 30, 2010 10:23 pm, edited 1 time in total.

Top
 Profile  
 
Jim Mantyla
 Post subject: Cowling Modifications
PostPosted: Wed Dec 01, 2010 1:16 pm 
Sr. Member
Sr. Member

Joined: Wed Oct 21, 2009 6:57 pm
Posts: 227
Location: Barrie, Ontario,Canada
Hey Jeff,

Can you explain better what you did with your cowl. I can't seem to visualize what you did from your description.

Thanks,

Jim Mantyla


Last edited by admin on Wed Dec 01, 2010 1:16 pm, edited 1 time in total.

Top
 Profile  
 
firepilot1
 Post subject: Cowling Modifications
PostPosted: Sun Mar 27, 2011 9:47 am 
Newbie
Newbie

Joined: Sun Apr 18, 2010 12:02 pm
Posts: 19
Location: USA
Hey guys...

Which cowling do I have? Can you tell from this photo? I know it is fiberglass.

Tim A.

Image Insert:
Image

Put File Caption Here


Last edited by admin on Sun Mar 27, 2011 9:47 am, edited 1 time in total.

Top
 Profile  
 
hurant
 Post subject: Cowling Modifications
PostPosted: Sun Mar 27, 2011 2:09 pm 
Newbie
Newbie

Joined: Thu Oct 22, 2009 7:45 pm
Posts: 36
Location: USA
The Rattray cowling bottom half is a sucker to get off without pulling the prop. I cut the sides out of the bottom half and hinged it to the top half which makes it easy to get at the bottom plugs and accessory section but I still have to buckle the bottom half to get it past the prop spinner. If I had it to do over I would cut the side down t the landing gear strut opening.


Last edited by admin on Sun Mar 27, 2011 2:09 pm, edited 1 time in total.

Top
 Profile  
 
SHIPCHIEF
PostPosted: Mon Jul 02, 2012 10:20 pm 
Sr. Member
Sr. Member

Joined: Tue Nov 29, 2011 9:05 pm
Posts: 471
Location: USA
I haven't been all that happy with my cowl & scoop after looking at some of the cowls in this topic.
My scoop is crooked and the trailing edge is much closer to the left exhaust pipes that to the right.
Is this supposed to be this way?
I don't get very good manifold pressure at high speeds because the air filter is too thick and too small. Also it's right behind the inlet, so no deceleration/compression can occur.
It looks like the scoop just barely fits over a stock Piper Cherokee air inlet? (not sure)
Can anyone identify my cowl & scoop? It's pretty old & wiggly fiberglass, which has some bulges at the left cheek top, and right cheek forward & low. Big Drag there.


Attachments:
DSCF1006.JPG
DSCF1006.JPG [ 2.1 MiB | Viewed 18465 times ]
DSCF1007.JPG
DSCF1007.JPG [ 1.86 MiB | Viewed 18465 times ]
Top
 Profile  
 
Rich Brazell
PostPosted: Mon Jul 02, 2012 11:21 pm 
Hero Member
Hero Member

Joined: Wed Oct 21, 2009 12:33 pm
Posts: 3095
Images: 64
Location: Jamul, CA (San Diego area)
Not sure what cowl and scoop you have, but it appears the scoop/bottom cowl was not mated properly to the carb. My scoop is offset to the carb which is NOT bolted to the center line of the engine. By offset I mean the entire scoop is displaced several inches to fit over the carb and place the entire scoop in line with bottom cowl. I also noticed the cowl cheeks may need a few more fastners ?

The attched pic shows my scoop and the offset.

RB
Attachment:
Copy (2) of S-18 paint 001.jpg
Copy (2) of S-18 paint 001.jpg [ 925.08 KiB | Viewed 18457 times ]


Top
 Profile Personal album  
 
dan
PostPosted: Mon Jul 02, 2012 11:35 pm 
Sr. Member
Sr. Member

Joined: Wed Oct 21, 2009 9:30 am
Posts: 898
Images: 0
Location: USA
Looks like the standard Glass cowling don't it Rich? That scoop has been around for many years I know CSA has those scoops, and also one that is real shallow and that's the one I used. Is the air rammed Chief or does it just blow in the scoop and and onto the filter.....Dan


Top
 Profile  
 
SHIPCHIEF
PostPosted: Tue Jul 03, 2012 9:15 am 
Sr. Member
Sr. Member

Joined: Tue Nov 29, 2011 9:05 pm
Posts: 471
Location: USA
I would say the air is not compressed by ram effect.
There is no divergent duct, and the filter is so close to the front that I don't think it would be possible.
The carb air box is a close fit inside the scoop. Very little room for an air filter.
Bruce Finney has an all aluminum welded cowl. What a beauty. His air scoop is the old style, not very smooth (no compound curves) but has a huge Buik air filter element inside.
Thanks for posting a pic of your (very) red cowl.
I agree that more fasteners would be better. I'll look into adding a few, and reglassing some of the worst areas.
Now I have to think about that crooked scoop... :P


Top
 Profile  
 
leewwalton
PostPosted: Tue Jul 03, 2012 9:31 am 
Administrator
Administrator
User avatar

Joined: Tue Oct 20, 2009 4:09 pm
Posts: 1705
Images: 107
Location: Houston, TX
@SHIPCHIEF The scoop is not necessary "Crooked" but placed inline with the carb airbox. As you know the motor is canted 3 deg to the right. It looks like the original builder just bolted the Piper airbox on and aligned the scoop with the airbox.

If you want to make some work for yourself the vans rv air box and intake scoop is pretty darn good. Much like the original Thorp box (like Bfinney has) but much cleaner aerodynamically while still benefitting from the large filter.

_________________
Lee Walton
Houston, TX
N51863,N118LW
KEFD


Top
 Profile Personal album  
 
davem
PostPosted: Tue Jul 03, 2012 12:50 pm 
Jr. Member
Jr. Member
User avatar

Joined: Thu Oct 22, 2009 9:27 am
Posts: 56
Location: USA
I will add a second vote for the Van's airbox and scoop, having put them on a several planes now (Tailwind, Thorp and Pitts S1), and I am sure that Gary Green can say the same. If you buy the Ellison version of the FAB (the airbox with filter kit) from Vans, it does not have the opening for the carb cut out, so you can cut the opening for the carb and offset the airbox some to compensate for the offset of the carburator (which is offset 1) by the location on the oil pan by Lycoming, and 2) by the engine offset built into the mount.) The total offset is about 1" as I vaguely recall, and I was able to take most or all of that out when mounting the airbox. However, if you look closely at Van's airscoops, they bulge out of the left side some which is how the RV's do it (I don't think there is engine offset in their mounts). Anyway, you can get the scoop to be exactly on the centerline, which does improve the appearance a bit. I used the scoop for the RV6/7, which is for a flatter bottomed cowl and joined up to my Thorp cowling quite well with just some trimming away of the rear air exit portion. FWIW.....

_________________
Dave M
Sacramento
ex-T-18 owner


Top
 Profile  
 
mgon
PostPosted: Tue Jul 03, 2012 7:24 pm 
Newbie
Newbie

Joined: Sun Feb 07, 2010 7:28 pm
Posts: 43
Images: 0
Location: USA
I also used the RV air box and 0320 scoop.
The box inlet angle had to changed.
The bottom cowl can be removed with not problem


Attachments:
IMG_0900.JPG
IMG_0900.JPG [ 725.48 KiB | Viewed 18391 times ]
Top
 Profile  
 
mgon
PostPosted: Tue Jul 03, 2012 7:27 pm 
Newbie
Newbie

Joined: Sun Feb 07, 2010 7:28 pm
Posts: 43
Images: 0
Location: USA
forgot this picture


Attachments:
006.JPG
006.JPG [ 698.33 KiB | Viewed 18391 times ]
Top
 Profile  
 
mgon
PostPosted: Tue Jul 03, 2012 7:45 pm 
Newbie
Newbie

Joined: Sun Feb 07, 2010 7:28 pm
Posts: 43
Images: 0
Location: USA
Box is off-set, but scoop has room to be centered.


Attachments:
005.JPG
005.JPG [ 892.18 KiB | Viewed 18387 times ]
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 22 posts ]  Go to page 1, 2  Next

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

[ Time : 0.260s | 16 Queries | GZIP : On ]