Attachment:
002.JPG [ 741.15 KiB | Viewed 8063 times ]
RB's tech tip of the week . During this annual I need to do a little touch up on the paint and repair a few fiberglass parts . Rather than drag out the compressor , hose and "BIG" gun along with mixing too much paint just to touch up a few areas , I bought out my 40 year old air brush .
![Huh? ???](./images/smilies/huh.gif)
Mix just a very small amount of paint and fill the little jar . You would be surprised how far the little bit of paint goes . Very little over spray and once the paint has cured all you need to do is buff out the area with a mild rubbing compound . No guessing on setting the air pressure , just hook it up to a can of air or you can get a small hobby compressor . I will probably get a small table top compressor as the price for the can of Jerry Brown approved air is some what expensive .
![Roll Eyes ::)](./images/smilies/rolleyes.gif)
It is almost impossible to get a run using this air brush .
![Cool 8)](./images/smilies/cool.gif)
I did touch up about 4-5 parts using only 2 of the small jars !
![Shocked :o](./images/smilies/shocked.gif)
You can get an air brush on E-Bay for about $10.00 ?
RB
![Afro O0](./images/smilies/afro.gif)