Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Mon Oct 26, 2020 8:27 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 39 posts ]  Go to page Previous  1, 2, 3
Author Message
Hagle347
 Post subject: Re: N218TH flying
PostPosted: Wed May 06, 2020 9:55 am 
Sr. Member
Sr. Member
User avatar

Joined: Tue Oct 26, 2010 3:42 pm
Posts: 481
Images: 19
Location: USA
In fabricated a few mounts. Made from angle stock and riveted some .032 sheet metal. They attach to the wing tip row of screws. I also drilled and countersunk #6 screws on the Hero 7 mount. I know their adhesive is good, but I prefer screws. This mount faces forward. I have another at 45 forward and 90 to the airplane. For formation shots, I can turn the camera 45 out to get a neat view.

More to come,
T
Image


Top
 Profile Personal album  
 
Ryan Allen
 Post subject: Re: N218TH flying
PostPosted: Mon May 11, 2020 7:06 am 
Sr. Member
Sr. Member
User avatar

Joined: Wed Oct 21, 2009 6:10 pm
Posts: 926
Images: 0
Location: Louisiana
Terry, are you still pleased with your oil cooler location? Do you happen to have any photos of your install of the oil cooler and its location? I would like to copy your location.


Top
 Profile Personal album  
 
Hagle347
 Post subject: Re: N218TH flying
PostPosted: Mon May 11, 2020 8:12 am 
Sr. Member
Sr. Member
User avatar

Joined: Tue Oct 26, 2010 3:42 pm
Posts: 481
Images: 19
Location: USA
Ryan, I sent you a couple photo of the install. Yes, I’m happy with the location. The cardboard form you see on the one photo is to set the size for the duct. I’m taking air from the right side and use skeet hose to feed the duct.
Image


Top
 Profile Personal album  
 
Hagle347
 Post subject: Re: N218TH flying
PostPosted: Thu Oct 01, 2020 7:01 pm 
Sr. Member
Sr. Member
User avatar

Joined: Tue Oct 26, 2010 3:42 pm
Posts: 481
Images: 19
Location: USA
Even in the ‘age of COVID’ I’ve been able to make steady progress on completing Phase 1. As of today, I have 2.5 hours until I reach the magic 40!
Today was big in its own way. It was the first time I’ve been able to fly the airplane 2 days in a row. Tomorrow afternoon will make 3 in a row....weather permitting. I wasn’t happy with the canopy trim- so I made a new one out of fiberglass. It fits much better.
The October plan is once the 40 hours is done- the paint job prep begins. Fall is awesome on the gulf coast- humidity is lower and the temperature more conducive for paint. That is , more conducive for the folks that will be suited up and in the spray booth.
Paint prep begins after October 17th.

More to come......

Image

Image


Top
 Profile Personal album  
 
Ryan Allen
 Post subject: Re: N218TH flying
PostPosted: Thu Oct 01, 2020 7:31 pm 
Sr. Member
Sr. Member
User avatar

Joined: Wed Oct 21, 2009 6:10 pm
Posts: 926
Images: 0
Location: Louisiana
Thats looks great Terry, I wish I had your fiberglass skills.


Top
 Profile Personal album  
 
bfinney
 Post subject: Re: N218TH flying
PostPosted: Thu Oct 01, 2020 11:29 pm 
Sr. Member
Sr. Member
User avatar

Joined: Thu Oct 22, 2009 2:24 pm
Posts: 464
Images: 6
Location: Auburn, WA USA
Terry,
How many layers of glass did you use? I'm assuming that you laid it up in place on the airplane.

inquiring minds want to know 8)

I like it, you may have just cause me some more work.

_________________
Bruce Finney
N18JF T-18C #262
Auburn, WA USA


Top
 Profile Personal album  
 
Hagle347
 Post subject: Re: N218TH flying
PostPosted: Fri Oct 02, 2020 9:14 pm 
Sr. Member
Sr. Member
User avatar

Joined: Tue Oct 26, 2010 3:42 pm
Posts: 481
Images: 19
Location: USA
Hey Bruce, yes...I used the airplane as the mold. It was one layer of matte glass. West Marine 105 and 205 activator. And some west 407 and 410 microballoons. The secret is In the 3m Mylar tape that the cured epoxy doesn’t stick to.
Image

Image

Image

Image


Top
 Profile Personal album  
 
Hagle347
 Post subject: Re: N218TH flying
PostPosted: Sat Oct 03, 2020 5:24 pm 
Sr. Member
Sr. Member
User avatar

Joined: Tue Oct 26, 2010 3:42 pm
Posts: 481
Images: 19
Location: USA
Today we had awesome weather along the Florida gulf coast. I was able to do my ‘long’ course and arrive back at home base at exactly 40 hours....Phase 1 now complete.
It’s the first of many milestones, the next one being paint.


Image

Image


Top
 Profile Personal album  
 
jtwigg
 Post subject: Re: N218TH flying
PostPosted: Thu Oct 08, 2020 9:48 pm 
Sr. Member
Sr. Member
User avatar

Joined: Thu Sep 03, 2015 10:11 pm
Posts: 176
Images: 0
Terry,

What are those 3 things below your windshield in the pictures? Decals?

How do you like the GRT EFIS? I like their CHT and EGT trend lines.

_________________
John Twigg N12055 SN.79 Pittsburgh, PA (KFWQ)


Top
 Profile Personal album  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 39 posts ]  Go to page Previous  1, 2, 3

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

[ Time : 1.069s | 10 Queries | GZIP : On ]