| Thorp Air Command - T18.net http://thorp18.com/thorpforum/ |
|
| Baffles http://thorp18.com/thorpforum/viewtopic.php?f=5&t=8719 |
Page 1 of 1 |
| Author: | PanchoGA [ Wed Jul 20, 2022 2:17 pm ] |
| Post subject: | Baffles |
Does anybody have any good solutions for baffles? The baffles I have came with the engine, so they fit very well on the engine, but not so well under the cowling. I'm particularly interested in transitions from the cooling air inlets in the cheek cowls. My engine is an IO360. Model is S18. Thanks. |
|
| Author: | James Grahn [ Thu Jul 21, 2022 10:31 am ] |
| Post subject: | Re: Baffles |
I have cardboard templates that I can send you if you like. Cubes |
|
| Author: | PanchoGA [ Thu Jul 21, 2022 12:15 pm ] |
| Post subject: | Re: Baffles |
Hey Jim, Are the templates for the transitions from the cooling inlets to the baffles? If so, please send them to me. I think I have the rest figured out. Thanks, Frank |
|
| Author: | James Grahn [ Thu Jul 21, 2022 6:08 pm ] |
| Post subject: | Re: Baffles |
Not really. They are basically the Vans stuff cut down to Thorp size. It has forward Ramos that go into the inlet. But nothing fancy. Cubes |
|
| Author: | PanchoGA [ Fri Jul 22, 2022 7:13 am ] |
| Post subject: | Re: Baffles |
Ramos?? |
|
| Author: | david read [ Fri Jul 22, 2022 8:46 pm ] |
| Post subject: | Re: Baffles |
Ramps I imagine |
|
| Author: | James Grahn [ Sat Jul 23, 2022 9:03 am ] |
| Post subject: | Re: Baffles |
Um. Yeah. Cubes |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|