Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Tue Mar 19, 2024 5:32 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 23 posts ]  Go to page 1, 2  Next
Author Message
cw21f
 Post subject: Metal cowling pics?
PostPosted: Sat Apr 04, 2015 6:30 am 
Newbie
Newbie

Joined: Sat Apr 10, 2010 3:39 am
Posts: 19
Location: USA
Have read much about the efficiency and beauty of the original metal cowling built by John Thorp. Have searched this and the prior site but haven't yet been able to find any pictures. If someone has a pic or two can you share?
Thanks,
Chris


Top
 Profile  
 
fytrplt
 Post subject: Re: Metal cowling pics?
PostPosted: Sat Apr 04, 2015 7:23 am 
Hero Member
Hero Member
User avatar

Joined: Tue Oct 20, 2009 8:07 pm
Posts: 1138
Images: 2
Location: Lakeland, Florida, USA
Here is my version of it.

Image

_________________
Bob Highley
N711SH
SN 835
KLAL


Top
 Profile Personal album  
 
bfinney
 Post subject: Re: Metal cowling pics?
PostPosted: Sat Apr 04, 2015 6:38 pm 
Sr. Member
Sr. Member
User avatar

Joined: Thu Oct 22, 2009 2:24 pm
Posts: 501
Images: 6
Location: Yelm, WA USA
My aircraft has the drop hammer formed cheak cowls. The ugly photo is when I stripped the paint in 2013, the slimey green stuff is zinc cromate primer, it didn't want to come off had to use multiple coats of paint stripper. There are multiple parts forward of the seam that are welded, hard to see in the photo.
Image
Here is how it looks with new paint.
Image

_________________
Bruce Finney
N18JF T-18C #262
Yelm, WA USA


Top
 Profile Personal album  
 
Ryan Allen
 Post subject: Re: Metal cowling pics?
PostPosted: Sat Apr 04, 2015 6:54 pm 
Hero Member
Hero Member
User avatar

Joined: Wed Oct 21, 2009 6:10 pm
Posts: 1104
Images: 0
Location: Louisiana
Here's mine
Attachment:
File comment: Cheek
DSCF7958.JPG
DSCF7958.JPG [ 1.4 MiB | Viewed 16634 times ]


Top
 Profile Personal album  
 
Bill Williams
 Post subject: Re: Metal cowling pics?
PostPosted: Sat Apr 04, 2015 7:28 pm 
This is Bob's and I just after we completed making the metal cowls on our Thorps. We found that the temperatures dropped 50 plus degrees as opposed to the fiberglas cowls
Image


Top
  
 
cw21f
 Post subject: Re: Metal cowling pics?
PostPosted: Sun Apr 05, 2015 7:18 am 
Newbie
Newbie

Joined: Sat Apr 10, 2010 3:39 am
Posts: 19
Location: USA
Thank you all for sharing the cowl pictures. Has anybody measured the intake and exit size of the metal cowl? Curious is the efficiency is due to shape, ratio of air entering and exiting the cowl, what goes on with the baffles or plenum underneath or all of the above?


Top
 Profile  
 
Bill Williams
 Post subject: Re: Metal cowling pics?
PostPosted: Sun Apr 05, 2015 10:19 am 
Bob and I made our "buck" using the old fiberglass cowl, never really took a measurement though. If you look at a Thorp cowl the intakes are slanted back a few degrees at the bottom. This yields a bigger opening in climb and closes down slightly in cruise from the tail high attitude in flight. For the cooler temperatures, I believe this is a result of aluminum transferring the heat better than glass, remember they use glass as an insulator on exhaust.


Top
  
 
dickwolff
 Post subject: Re: Metal cowling pics?
PostPosted: Thu Apr 09, 2015 12:00 pm 
Sr. Member
Sr. Member

Joined: Tue Nov 24, 2009 7:40 pm
Posts: 498
Images: 6
Location: Canada
Bob/Bill, just for curiosity, can you post a picture of the cowl bucks?

How many pieces is the inlet made of? Just two?!

D

PS... no guys, I'm not going to make a metal cowl. ;D
Maybe some winter when I'm retired, but not now.


Top
 Profile Personal album  
 
Bill Williams
 Post subject: Re: Metal cowling pics?
PostPosted: Thu Apr 09, 2015 6:40 pm 
I'll dig the buck out of the back of the hanger and post a picture. The front "bowl" is three pieces. We made the complete front bowl, and cut it in two after it was welded. As a side note, the top, bottom and cheeks are a flat wrap. There is some forming around the spinner area and lower cowl panels. Considerable annealing was done to form the parts from 6061 and 5052 aluminum. We used a 1" wide magic marker to paint the metal and using a torch burned it off. It will go back hard in a day or two.


Top
  
 
jrevens
 Post subject: Re: Metal cowling pics?
PostPosted: Fri Apr 10, 2015 1:53 am 
Sr. Member
Sr. Member
User avatar

Joined: Thu Oct 22, 2009 10:13 pm
Posts: 789
Location: USA
Bill Williams wrote:
...Considerable annealing was done to form the parts from 6061 and 5052 aluminum. We used a 1" wide magic marker to paint the metal and using a torch burned it off. It will go back hard in a day or two.


This is a simplified explanation, but for whatever it's worth (probably not much), 5052 is a non-heat-treatable alloy. It will harden as it is cold worked, but I believe it won't age-harden after annealing. 6061 can be much the same, although it is heat-treatable. When annealed to a certain temperature (I don't remember exactly... something over 500 deg.) it will not age-harden unless it is quenched after heating. It too can be cold work-hardened of course. More than you wanted to know, I'm sure.

_________________
John Evens
Arvada, Colorado

T-18 N71JE (sold)
Kitfox 7 SS N27JE


Top
 Profile  
 
fytrplt
 Post subject: Re: Metal cowling pics?
PostPosted: Fri Apr 10, 2015 6:57 am 
Hero Member
Hero Member
User avatar

Joined: Tue Oct 20, 2009 8:07 pm
Posts: 1138
Images: 2
Location: Lakeland, Florida, USA
We used 3003-0 for the really hard to form parts.

Image

This picture shows the piece next to the spinner and the inlet as formed (on floor) before we cut it apart.

Image

This is the annealing method Bill talked about.

Image

Fitting the cheeks before welding.

Some fun! Brings back memories.

_________________
Bob Highley
N711SH
SN 835
KLAL


Top
 Profile Personal album  
 
Bill Williams
 Post subject: Re: Metal cowling pics?
PostPosted: Sun Apr 19, 2015 4:55 pm 
Pictures of the buck Bob made for making our metal cowls
It was made in four pieces and welded, the front ring one piece. After welding we cut it in half
Image

Image


Top
  
 
dickwolff
 Post subject: Re: Metal cowling pics?
PostPosted: Sun Apr 19, 2015 5:59 pm 
Sr. Member
Sr. Member

Joined: Tue Nov 24, 2009 7:40 pm
Posts: 498
Images: 6
Location: Canada
Nice. You guys are artists.


Top
 Profile Personal album  
 
Ryan Allen
 Post subject: Re: Metal cowling pics?
PostPosted: Mon Apr 20, 2015 4:33 pm 
Hero Member
Hero Member
User avatar

Joined: Wed Oct 21, 2009 6:10 pm
Posts: 1104
Images: 0
Location: Louisiana
Wow....I'm not sure if the buck (that's a new term for me so I learned something) or the final product looks more impressive. Man, I can see that if I ever have to replace my metal cowl/cheeks, I'm going to just have to buy the fiberglass cowling from ACS.


Top
 Profile Personal album  
 
James Grahn
 Post subject: Re: Metal cowling pics?
PostPosted: Mon Apr 20, 2015 7:02 pm 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1431
Images: 0
Location: USA
Metal cowls will never wear out. And ACS does not have a Thorp cowl setup, be ThorpCentral does.
Cubes


Top
 Profile Personal album  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 23 posts ]  Go to page 1, 2  Next

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

[ Time : 0.110s | 16 Queries | GZIP : On ]