Thorp Air Command - T18.net • View topic

View unanswered posts | View active topics

Board index » Thorp T-18 » Cowlings

All times are UTC - 6 hours [ DST ]

Carbon Fibre Spinner

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

Aardmanf111

Post subject: Carbon Fibre Spinner

Posted: Sun Apr 17, 2022 11:44 pm

Newbie

Joined: Fri Jan 10, 2020 1:28 am
Posts: 9

Hi All,

I'm looking into producing a Carbon fibre Spinner. I was hoping that someone, preferably in Australia, would have a spare, nicely shaped spinner that they might lend me to be the master for a new mould?

Cheers,
Bryan

Top

Ryan Allen

Post subject: Re: Carbon Fibre Spinner

Posted: Mon Apr 18, 2022 5:42 pm

Hero Member

Joined: Wed Oct 21, 2009 6:10 pm
Posts: 1118
Images: 0
Location: Louisiana

if you make one, post a photo here so we can see it!

Top

Aardmanf111

Post subject: Re: Carbon Fibre Spinner

Posted: Mon Apr 18, 2022 8:54 pm

Newbie

Joined: Fri Jan 10, 2020 1:28 am
Posts: 9

I definitely will!

Top

rrobut

Post subject: Re: Carbon Fibre Spinner

Posted: Tue Apr 19, 2022 6:17 am

Newbie

Joined: Sat Nov 30, 2013 7:08 pm
Posts: 22
Location: Brisbane

Bryan, I might be able to get one for you in a couple of weeks.
I’m in Brisbane as well

Top

leewwalton

Post subject: Re: Carbon Fibre Spinner

Posted: Wed Apr 20, 2022 10:46 am

Administrator

Joined: Tue Oct 20, 2009 4:09 pm
Posts: 1715
Images: 107
Location: Houston, TX

I have a mold and have made several CF spinners ... the biggest challenge is balance. I recommend a vacuum bag or pressure bag to equalize the resin.

_________________
Lee Walton
Houston, TX
N51863,N118LW
KEFD

Top

Aardmanf111

Post subject: Re: Carbon Fibre Spinner

Posted: Mon Jan 02, 2023 5:42 am

Newbie

Joined: Fri Jan 10, 2020 1:28 am
Posts: 9

leewwalton wrote:

I have a mold and have made several CF spinners ... the biggest challenge is balance. I recommend a vacuum bag or pressure bag to equalize the resin.

Hi Lee,

Yeah, I will be using a vac bag for the part. What layup stack did you use when you produced your CF spinners?

Cheers,
Bryan

Top

Jim Mantyla

Post subject: Re: Carbon Fibre Spinner

Posted: Mon Jan 02, 2023 8:17 pm

Sr. Member

Joined: Wed Oct 21, 2009 6:57 pm
Posts: 232
Location: Barrie, Ontario,Canada

Guys,

I am not sure what advantages there are with a CF spinner over a spun aluminum one. I bought one of the spun aluminum ones from Cubes and it runs dead true with no balance issues. I am very happy with it and the quick service I got with Cubes.

Regards,

Jim

Top

Aardmanf111

Post subject: Re: Carbon Fibre Spinner

Posted: Wed Jan 04, 2023 5:50 am

Newbie

Joined: Fri Jan 10, 2020 1:28 am
Posts: 9

Jim Mantyla wrote:

Weight is the main benefit, I’d love to know how much your spun aluminium one weighs if you wouldn’t mind measuring it one time!

Top

Jim Mantyla

Post subject: Re: Carbon Fibre Spinner

Posted: Tue Jan 10, 2023 10:16 am

Sr. Member

Joined: Wed Oct 21, 2009 6:57 pm
Posts: 232
Location: Barrie, Ontario,Canada

I just weighted my spinner. This is the one I got from Cubes. It weights 795 grams with paint on it. I also weighted a Ken Brock spinner and it is 845 grams with paint on it as well. Let us know what the C/F spinner weights.

Regards,

Jim

Top

Page 1 of 1

[ 9 posts ]

Board index » Thorp T-18 » Cowlings

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: