Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Thu Mar 28, 2024 5:22 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 18 posts ]  Go to page 1, 2  Next
Author Message
hjubm2
PostPosted: Mon Sep 25, 2017 11:03 pm 
Newbie
Newbie

Joined: Wed Jun 01, 2016 1:13 am
Posts: 35
Location: Barossa Valley, South Australia
It's amazing how something so small and cheap can hold a whole aircraft up. I've been trying to get a Driving Washer (Aircraft Spruce Part Number 06-13608) for my Lang D-501 tail-wheel through Aircraft Spruce for the last month but they keep pushing the date back. Does anyone have one of these laying around or know of a place that would have stock of this simple part? It's basically the last part in the very expensive puzzle to finally be able to get my aircraft back in the air after spending nearly 2 and a half months at the maintenance place for what should have been an easy annual inspection.

If anyone can help me out I'd greatly appreciate it.

Thanks all


Top
 Profile  
 
Jeff J
PostPosted: Tue Sep 26, 2017 7:14 am 
Sr. Member
Sr. Member

Joined: Wed Aug 31, 2016 8:18 am
Posts: 583
Images: 0
Location: eastern OK
I am not familiar with the Lang and the diagram on Aircraft Spruce was not much help. Is it a washer that might be found at a good hardware store or some place like Fastenal or Grainger?

_________________
Thorp T18
O-320-B3B (160 HP)
68x74 Sterba Propeller

"The joke in aviation is, 'If you want to make a million, you'd better start with £10m.' " -Bruce Dickinson


Top
 Profile Personal album  
 
hjubm2
PostPosted: Tue Sep 26, 2017 7:25 am 
Newbie
Newbie

Joined: Wed Jun 01, 2016 1:13 am
Posts: 35
Location: Barossa Valley, South Australia
Thanks for the suggestions Jeff. Unfortunately from what I can tell it doesn't look like a standard part that is easy to come across at a hardware store or similar due to the cut outs etc.

Image


Top
 Profile  
 
Jeff J
PostPosted: Tue Sep 26, 2017 8:35 am 
Sr. Member
Sr. Member

Joined: Wed Aug 31, 2016 8:18 am
Posts: 583
Images: 0
Location: eastern OK
I see what you mean. I googled "D washer" and came up with some sources but so far nothing with a notch. The notch would be easy to do on a milling machine or lathe if the right size washer could be found.

_________________
Thorp T18
O-320-B3B (160 HP)
68x74 Sterba Propeller

"The joke in aviation is, 'If you want to make a million, you'd better start with £10m.' " -Bruce Dickinson


Top
 Profile Personal album  
 
Jeff J
PostPosted: Tue Sep 26, 2017 9:05 am 
Sr. Member
Sr. Member

Joined: Wed Aug 31, 2016 8:18 am
Posts: 583
Images: 0
Location: eastern OK
Just found this... https://thompsonaircraftrepair.com/app/shop/part?=67

_________________
Thorp T18
O-320-B3B (160 HP)
68x74 Sterba Propeller

"The joke in aviation is, 'If you want to make a million, you'd better start with £10m.' " -Bruce Dickinson


Top
 Profile Personal album  
 
hjubm2
PostPosted: Tue Sep 26, 2017 9:08 am 
Newbie
Newbie

Joined: Wed Jun 01, 2016 1:13 am
Posts: 35
Location: Barossa Valley, South Australia
Cheers for all the help Jeff. I've tried getting in contact with that company about the part since they don't have shipping to Australia but haven't had a reply yet, hence the hunt continues


Top
 Profile  
 
hjubm2
PostPosted: Fri Sep 29, 2017 6:42 pm 
Newbie
Newbie

Joined: Wed Jun 01, 2016 1:13 am
Posts: 35
Location: Barossa Valley, South Australia
I've been looking into this further, it looks like Aircraft Spruce has one of the Driving Washers in stock in the Canadian Warehouse but of course they won't ship it to Australia from there. Does anyone know of a shipping forwarding company that works in Canada? So far I've only been able to find ones that work by getting the items sent to an American address which won't work in this situation.

Cheers


Top
 Profile  
 
James Grahn
PostPosted: Sat Sep 30, 2017 12:50 am 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1434
Images: 0
Location: USA
If needed, I'll buy the part and ship it to you. For those who don't know, I currently get a 70% discount with FedEx express shipping. I pass that along to you.
Cubes


Top
 Profile Personal album  
 
hjubm2
PostPosted: Sat Sep 30, 2017 2:52 am 
Newbie
Newbie

Joined: Wed Jun 01, 2016 1:13 am
Posts: 35
Location: Barossa Valley, South Australia
James Grahn wrote:
If needed, I'll buy the part and ship it to you. For those who don't know, I currently get a 70% discount with FedEx express shipping. I pass that along to you.
Cubes


If you could help me out like that I would really appreciate it Cubes. I've found it quite hard to actually get a hold of this part so more then happy to cover your time etc as well.

Thanks


Top
 Profile  
 
James Grahn
PostPosted: Sat Sep 30, 2017 9:47 am 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1434
Images: 0
Location: USA
Can you give me the Spruce part number?
Cubes


Top
 Profile Personal album  
 
Rich Brazell
PostPosted: Sat Sep 30, 2017 10:37 am 
Hero Member
Hero Member

Joined: Wed Oct 21, 2009 12:33 pm
Posts: 3095
Images: 64
Location: Jamul, CA (San Diego area)
Buy more than one ! ;) Cost the same to ship and Custom duty will probably be the same . :P

RB O0


Top
 Profile Personal album  
 
hjubm2
PostPosted: Sat Sep 30, 2017 7:37 pm 
Newbie
Newbie

Joined: Wed Jun 01, 2016 1:13 am
Posts: 35
Location: Barossa Valley, South Australia
James Grahn wrote:
Can you give me the Spruce part number?
Cubes


Cheers Cubes, the part number is 06-13608.


Rich Brazell wrote:
Buy more than one ! ;) Cost the same to ship and Custom duty will probably be the same . :P

RB O0


Hey if they had more then one in stock I prob would but since I need the part ASAP to get the aircraft flying again after over 2 months and they keep pushing the estimated restock date back there is no point ordering more then one. Can't handle the withdrawal from not being able to fly!


Top
 Profile  
 
James Grahn
PostPosted: Sun Oct 01, 2017 12:52 am 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1434
Images: 0
Location: USA
I tried to order tonight but they showed no stock. I'll call tomorrow.
Cubes


Top
 Profile Personal album  
 
hjubm2
PostPosted: Sun Oct 01, 2017 12:56 am 
Newbie
Newbie

Joined: Wed Jun 01, 2016 1:13 am
Posts: 35
Location: Barossa Valley, South Australia
James Grahn wrote:
I tried to order tonight but they showed no stock. I'll call tomorrow.
Cubes


Thanks mate, really appreciate it. It's showing out of stock here for both of the US warehouses but the Canadian one is showing stock when I selected that one. Not sure why I can't be easy...


Top
 Profile  
 
James Grahn
PostPosted: Mon Oct 02, 2017 8:05 pm 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1434
Images: 0
Location: USA
Just so you know, a fellow Thorper in Canada is going to grab the washer and mail it to me. I'll send it your way when I get it.
Cubes


Top
 Profile Personal album  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 18 posts ]  Go to page 1, 2  Next

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

[ Time : 0.166s | 12 Queries | GZIP : On ]