| Thorp Air Command - T18.net http://thorp18.com/thorpforum/ |
|
| How do You make a front spinner bulkhead? http://thorp18.com/thorpforum/viewtopic.php?f=47&t=8612 |
Page 1 of 1 |
| Author: | Ryan Allen [ Sun May 02, 2021 4:29 pm ] |
| Post subject: | How do You make a front spinner bulkhead? |
How do you make a front spinner bulkhead? I have a spinner and rear bulkhead, but I don't have a front bulkhead. |
|
| Author: | Ryan Allen [ Sun May 02, 2021 4:39 pm ] |
| Post subject: | Re: How do You make a front spinner bulkhead? |
Just looked on Thorp Central. There are 3 front bulkheads listed. Part # 5041-3 (Front Plate 5-1/2"). Cubes, is the 5-1/2" listed in the description the radius of the front bulkhead? Here is a link: https://thorpcentral.com/catalog/prop.html |
|
| Author: | James Grahn [ Sun May 02, 2021 7:42 pm ] |
| Post subject: | Re: How do You make a front spinner bulkhead? |
The dimension is for the thickness of the prop hub. I currently only have 3 9/16” in stock (as well as CS ones). The 4.5” should be done any day. Bad news is I’m shocked at how much the price of manufacturing went up. Cubes |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|