Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Thu Mar 28, 2024 1:19 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
Jim0258
 Post subject: Restoring N7077J
PostPosted: Sat Jul 15, 2017 10:00 pm 
Newbie
Newbie

Joined: Wed Feb 12, 2014 8:09 pm
Posts: 8
In March, I flew out to CA to pick up the airplane and trucked it back to Ohio. Cubes was a big help getting me some parts I needed to get the main gear on as well as a few other bits and pieces. I had a lot of work to do on the aft fuselage, but I think that's all behind me now (hehehe). I've been meaning to post some pictures for a while, and am finally getting around to it.


Attachments:
File comment: Replacement skin installed.
ReplacementSkin.jpg
ReplacementSkin.jpg [ 54.44 KiB | Viewed 6782 times ]
InsideDoubler.jpg
InsideDoubler.jpg [ 53.29 KiB | Viewed 6782 times ]
File comment: Found some cracks in the upper and lower flared flange. None went beyond the flange itself, but I'm betting they were caused by the lack of a bolster. I stopped drilled them and installed doublers.
InsideDoublers.jpg
InsideDoublers.jpg [ 59.82 KiB | Viewed 6782 times ]
File comment: Test fit on the air frame.
FittingNewFin.jpg
FittingNewFin.jpg [ 65.47 KiB | Viewed 6782 times ]
VORAntennsMount.jpg
VORAntennsMount.jpg [ 63.55 KiB | Viewed 6782 times ]
File comment: Made a new vertical fin with a fitting for a NAV antenna.
FinJig.jpg
FinJig.jpg [ 46.02 KiB | Viewed 6782 times ]
File comment: Made a new skin with access panels.
ReplacementSkinA.jpg
ReplacementSkinA.jpg [ 50.59 KiB | Viewed 6782 times ]
File comment: I cut the flange off and made repairs.
AftBHRepairs.jpg
AftBHRepairs.jpg [ 51.8 KiB | Viewed 6782 times ]
SkinRemoved.jpg
SkinRemoved.jpg [ 49.68 KiB | Viewed 6782 times ]
SkinHadToGo2.jpg
SkinHadToGo2.jpg [ 44.22 KiB | Viewed 6782 times ]
File comment: Now, this was a problem ...
SkinHadToGo.jpg
SkinHadToGo.jpg [ 53.42 KiB | Viewed 6782 times ]
InsideLowerSkinDoubler.jpg
InsideLowerSkinDoubler.jpg [ 43.11 KiB | Viewed 6782 times ]
DoublerParts.jpg
DoublerParts.jpg [ 54.99 KiB | Viewed 6782 times ]
File comment: Customized the bolster support. The stock part would not fit, and I wanted to distribute the load a little more evenly between the BHs.
OutsideBottomDoublers.jpg
OutsideBottomDoublers.jpg [ 39.49 KiB | Viewed 6782 times ]
File comment: Main Gear On
MainGearOn.jpg
MainGearOn.jpg [ 51.34 KiB | Viewed 6782 times ]
File comment: Back in Ohio
GotHerHome.jpg
GotHerHome.jpg [ 71.13 KiB | Viewed 6782 times ]
Engine.jpg
Engine.jpg [ 113.9 KiB | Viewed 6782 times ]
Loaded.JPG
Loaded.JPG [ 129.58 KiB | Viewed 6782 times ]
File comment: Loading up the truck
Loading2.jpg
Loading2.jpg [ 124.95 KiB | Viewed 6782 times ]

_________________
N7077J
I-68
Top
 Profile  
 
Rich Brazell
 Post subject: Re: Restoring N7077J
PostPosted: Sat Jul 15, 2017 11:42 pm 
Hero Member
Hero Member

Joined: Wed Oct 21, 2009 12:33 pm
Posts: 3095
Images: 64
Location: Jamul, CA (San Diego area)
Nice looking metal work ! ;)

RB O0


Top
 Profile Personal album  
 
James Grahn
 Post subject: Re: Restoring N7077J
PostPosted: Sun Jul 16, 2017 12:59 am 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1434
Images: 0
Location: USA
Wow that was a lot of work. That part you designed looks really nice. I'm glad it's coming together.
Cubes


Top
 Profile Personal album  
 
TonyNZ
 Post subject: Re: Restoring N7077J
PostPosted: Sun Jul 16, 2017 3:46 am 
Full Member
Full Member
User avatar

Joined: Thu Oct 22, 2009 10:25 pm
Posts: 105
Images: 8
Location: New Zealand
Great work. Boy there are some good restorations taking place! :)
Tony
ZK-VMS
T18C


Top
 Profile Personal album  
 
Jim0258
 Post subject: Re: Restoring N7077J
PostPosted: Sun Jul 16, 2017 8:00 am 
Newbie
Newbie

Joined: Wed Feb 12, 2014 8:09 pm
Posts: 8
Rich Brazell wrote:
Nice looking metal work ! ;)

RB O0

Thanks! I've been getting lots of practice over the last 5 years working on a Midget Mustang Project.

_________________
N7077J
I-68


Top
 Profile  
 
jtwigg
 Post subject: Re: Restoring N7077J
PostPosted: Wed Oct 17, 2018 11:38 am 
Sr. Member
Sr. Member
User avatar

Joined: Thu Sep 03, 2015 10:11 pm
Posts: 192
Images: 0
Jim,

How is your project coming? Where are you in Ohio?

John

_________________
John Twigg N12055 SN.79 Pittsburgh, PA (KFWQ)


Top
 Profile Personal album  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

[ Time : 0.287s | 14 Queries | GZIP : On ]