Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Thu Mar 28, 2024 6:22 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
Ryan Allen
PostPosted: Sun Apr 30, 2017 9:21 am 
Hero Member
Hero Member
User avatar

Joined: Wed Oct 21, 2009 6:10 pm
Posts: 1105
Images: 0
Location: Louisiana
Can I use long AN3 bolts (that would go all the way through the tube) to attach the end pieces to the elevator push pull tube instead of rivets?


Top
 Profile Personal album  
 
James Grahn
PostPosted: Sun Apr 30, 2017 10:16 am 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1434
Images: 0
Location: USA
No.
Cubes


Top
 Profile Personal album  
 
Ryan Allen
PostPosted: Mon May 01, 2017 6:58 am 
Hero Member
Hero Member
User avatar

Joined: Wed Oct 21, 2009 6:10 pm
Posts: 1105
Images: 0
Location: Louisiana
As a point learning here, what's the issue?


Top
 Profile Personal album  
 
James Grahn
PostPosted: Mon May 01, 2017 9:11 am 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1434
Images: 0
Location: USA
I'm not a structures engineer, but I know the rivets have to pinch each side of the tube. A bolt straight through will not do that.
Any structures guys out there want to sing out?
Cubes


Top
 Profile Personal album  
 
ljkrume
PostPosted: Mon May 01, 2017 3:02 pm 
Sr. Member
Sr. Member

Joined: Mon Oct 26, 2009 1:33 pm
Posts: 232
Images: 213
Location: USA
Just like he says. Rivets swell to fill the hole too. Ensures tight connections and also removes worry about things coming loose... Les


Top
 Profile Personal album  
 
Ryan Allen
PostPosted: Mon May 01, 2017 5:52 pm 
Hero Member
Hero Member
User avatar

Joined: Wed Oct 21, 2009 6:10 pm
Posts: 1105
Images: 0
Location: Louisiana
James Grahn wrote:
I'm not a structures engineer, but I know the rivets have to pinch each side of the tube. A bolt straight through will not do that.
Any structures guys out there want to sing out?
Cubes


Oh, makes sense. I hadn't considered that. I was only considering the end pieces being pulled out of the tube by a push/pull force. Thanks.


Top
 Profile Personal album  
 
jrevens
PostPosted: Tue May 02, 2017 12:05 am 
Sr. Member
Sr. Member
User avatar

Joined: Thu Oct 22, 2009 10:13 pm
Posts: 789
Location: USA
With bolts the shear forces are concentrated in fewer areas (holes) than with the multiple rivets, as per design. Even an AN-3 bolt would probably have plenty of shear strength, but the issue is that the relatively thin aluminum will have much less. It's better to distribute the properly sized fasteners around the perimeter of the structure, and those rivets will also weigh less than even a single bolt.

Correction - I was thinking about the machined "cone" that I made for one end of my tube, that I attached with blind rivets. With the end fittings as per John's design, my honest thought is that AN-3 bolts could probably have adequate edge hole distance, and the "forked" end thick and stiff enough, to probably be fine structurally, but again - more weight. I wouldn't recommend it. It's always best to go "as designed" with important structural parts like this.

_________________
John Evens
Arvada, Colorado

T-18 N71JE (sold)
Kitfox 7 SS N27JE


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

[ Time : 0.137s | 12 Queries | GZIP : On ]