Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Thu Mar 28, 2024 5:42 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
Fly
 Post subject: Static Port Location
PostPosted: Sat Nov 21, 2015 12:32 pm 
Newbie
Newbie

Joined: Sat Jan 18, 2014 12:39 pm
Posts: 40
Before I drill any holes I thought I'd check and see if anyone has any feedback on static port placement. I've read the recommendation in newsletter 91 (forward of station 139 & just below W.L.42. Is that the location most people use?

Thanks,

Marshall


Top
 Profile  
 
jrevens
 Post subject: Re: Static Port Location
PostPosted: Sat Nov 21, 2015 12:44 pm 
Sr. Member
Sr. Member
User avatar

Joined: Thu Oct 22, 2009 10:13 pm
Posts: 789
Location: USA
My static port is on my pitot mast... works well.

_________________
John Evens
Arvada, Colorado

T-18 N71JE (sold)
Kitfox 7 SS N27JE


Top
 Profile  
 
fytrplt
 Post subject: Re: Static Port Location
PostPosted: Sat Nov 21, 2015 2:44 pm 
Hero Member
Hero Member
User avatar

Joined: Tue Oct 20, 2009 8:07 pm
Posts: 1140
Images: 2
Location: Lakeland, Florida, USA
What works best for me is: Blade pitot/static pickup on wing (ala Cherokee) hooked up to altimeter, VVI, and altitude encoder. Airspeed static open to cockpit air. This configuration has proven to be most accurate for me. Traditional holes on side of fuselage are affected by the Thorp cowling side outlets. As John said, the tail mast pick up per the plans is the most accurate. Some have reported erroneous readings at high angles of attack, however.

_________________
Bob Highley
N711SH
SN 835
KLAL


Top
 Profile Personal album  
 
Fly
 Post subject: Re: Static Port Location
PostPosted: Sat Nov 21, 2015 3:57 pm 
Newbie
Newbie

Joined: Sat Jan 18, 2014 12:39 pm
Posts: 40
Thanks for the advice guys. I've got a piper blade at the moment, but it proved unsuitable as a static source. I'm planning on using it for AOA going forward. I've got a spare pitot static mast for my Pitts, guess I'll go with that.

Thanks,

Marshall


Top
 Profile  
 
slayton
 Post subject: Re: Static Port Location
PostPosted: Wed Apr 28, 2021 9:45 pm 
Newbie
Newbie

Joined: Sat Aug 08, 2020 9:22 pm
Posts: 2
Has anyone had a good solution for a heated pitot? My static is located on the pitot mast as well. I want to get pitot heat, but I'm not seeing any reasonable options for heated pitot/static...just pitot.

Thanks,

Stephen


Top
 Profile  
 
leewwalton
 Post subject: Re: Static Port Location
PostPosted: Fri Apr 30, 2021 9:22 am 
Administrator
Administrator
User avatar

Joined: Tue Oct 20, 2009 4:09 pm
Posts: 1705
Images: 107
Location: Houston, TX
Usually an alternate static port (vented to the cabin) is the solution for this. I have not seen a heated static port on any GA airplane less than 12,500.

https://www.aircraftspruce.com/catalog/ ... -12168.php

_________________
Lee Walton
Houston, TX
N51863,N118LW
KEFD


Top
 Profile Personal album  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

[ Time : 0.158s | 13 Queries | GZIP : On ]