Thorp Air Command - T18.net http://thorp18.com/thorpforum/ |
|
Terry's Keeper - N218TH http://thorp18.com/thorpforum/viewtopic.php?f=36&t=7463 |
Page 4 of 14 |
Author: | fytrplt [ Sat Mar 05, 2016 7:58 pm ] |
Post subject: | Re: Terry's Keeper - N218TH |
I need some, too. |
Author: | Rich Brazell [ Sun Mar 06, 2016 1:41 pm ] |
Post subject: | Re: Terry's Keeper - N218TH |
Dick : I put my best men on it to search out and find das dust boot . They found a boot which I believe came with my Cleveland MC's . Only one boot survived (could only find one) after 32 years and it appears to be in great shape (no cracks or tears) as it has only rarely seen sunlight . It does have a P/N on it and it is stamped "Made in the USA ." P/N is 12300 and Cleveland parts do come up , but no where is there a boot . I even checked to Cleveland/Parker parts catalog and it does not show a boot ? Since you were the first one to express an interest in the long lost artifact it is yours . Send me your address and I'll mail it to ya . Disclaimer...I do not imply that this part fits your intended purpose and you install it at your own risk . Your boot mileage may vary . RB NX115RX rx115@cox.net |
Author: | Hagle347 [ Sun Mar 27, 2016 4:58 pm ] |
Post subject: | Re: Terry's Keeper - N218TH |
Some of the work the past couple weeks. Fitting the floor panels and fabricating covers for the sticks. |
Author: | Hagle347 [ Sun Mar 27, 2016 5:00 pm ] |
Post subject: | Re: Terry's Keeper - N218TH |
I found some nice light weight sound deadening stuff at Lowe's |
Author: | Rich Brazell [ Thu Mar 31, 2016 10:50 pm ] |
Post subject: | Re: Terry's Keeper - N218TH |
"Ummmm Seat Heaters ! DOH ! Looking good Homer . RB |
Author: | Hagle347 [ Wed Apr 06, 2016 6:51 am ] |
Post subject: | Re: Terry's Keeper - N218TH |
The intake pipes came back from the powder coat shop today. Part of the corrosion control program.... |
Author: | Hagle347 [ Fri May 27, 2016 8:49 pm ] |
Post subject: | Re: Terry's Keeper - N218TH |
I got word my GT propeller blades will ship Monday. |
Author: | Hagle347 [ Mon Oct 31, 2016 3:25 pm ] |
Post subject: | Re: Terry's Keeper - N218TH |
Here's the prop for TH. hartzell hub with GT carbon fiber blades. 22 lbs lighter than a standard Hartzell. |
Author: | Bill Williams [ Mon Oct 31, 2016 3:58 pm ] |
Post subject: | Re: Terry's Keeper - N218TH |
This panel does not have enough gauges to make it an airplane, HA! I'm going to wood grain my panel this winter. Now I have veneer, but it will not hold up to the heat. I have a wood grain kit I use for the antique cars |
Page 4 of 14 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |