Thorp Air Command - T18.net http://thorp18.com/thorpforum/ |
|
Terry's Keeper - N218TH http://thorp18.com/thorpforum/viewtopic.php?f=36&t=7463 |
Page 10 of 14 |
Author: | Hagle347 [ Tue Aug 07, 2018 1:00 pm ] |
Post subject: | Re: Terry's Keeper - N218TH |
Here’s a better shot of the whole panel area...taken today |
Author: | Ryan Allen [ Tue Aug 07, 2018 2:55 pm ] |
Post subject: | Re: Terry's Keeper - N218TH |
That does help. I don't know why I didn't think of that. Thank you again. You guys sure do nice work. Especially that window trim Bill has. I could try making that for days and still have nothing to show for it. |
Author: | James Grahn [ Mon Aug 13, 2018 9:04 pm ] |
Post subject: | Re: Terry's Keeper - N218TH |
Cool |
Author: | Hagle347 [ Mon Aug 27, 2018 7:51 am ] |
Post subject: | Re: Terry's Keeper - N218TH |
Last week I got the stab and vertical fin installed. |
Author: | James Grahn [ Mon Aug 27, 2018 9:16 am ] |
Post subject: | Re: Terry's Keeper - N218TH |
Woot! |
Author: | Rich Brazell [ Mon Aug 27, 2018 8:36 pm ] |
Post subject: | Re: Terry's Keeper - N218TH |
Nice steady progress ! I like that ! RB |
Author: | Jeff J [ Tue Aug 28, 2018 10:31 am ] |
Post subject: | Re: Terry's Keeper - N218TH |
Hagle347 wrote: This picture brings back a bad memory. I was hanging an IO-520 and trying to nudge the hoist sideways to get the engine in final position over the cradle and the hoist tipped, slamming the accessories into the firewall and the oil sump into the cradle. I got lucky. The only damage was to the sump and we had a spare sump on a shelf. |
Author: | Rich Brazell [ Sun Dec 30, 2018 8:31 pm ] |
Post subject: | Re: Terry's Keeper - N218TH |
I know some/most like to fab their own parts , but I found some parts on the Van's site that worked on my engine installation . One that worked out perfect was the Van's throttle and mixture bracket that goes between the carb and the engine . P/N-149-360 PC Kit . They also have one for the 0-320 . Provides a secure mounting for the throttle and mixture cables . About $25.00 if I recall right . Even if you don't buy Goggle the bracket and you will see installation and pics of the bracket . Would be fairly easy to fab one if so desired . BING , BANG , BOOM ! RB |
Page 10 of 14 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |