Thorp Air Command - T18.net
http://thorp18.com/thorpforum/

Intakes
http://thorp18.com/thorpforum/viewtopic.php?f=35&t=6383
Page 3 of 3

Author:  t18joe [ Mon Nov 21, 2011 8:06 pm ]
Post subject:  Intakes

Your carb heat install looks intersting. What rpm drop or temp rise do you get during your engine runup?

Thanks N633GG

Author:  dickwolff [ Fri Nov 03, 2017 6:24 am ]
Post subject:  Re: Intakes

I have a Lieder Box on GABY. The carb heat is actuated with a pushrod from the back of the box. The hole was sealed off with a rubber boot, but the rubber is rotten.

Any leads for a replacement boot? Or are we closing off this hole with a grommet now?

D

Author:  jrevens [ Fri Nov 03, 2017 11:46 am ]
Post subject:  Re: Intakes

dickwolff wrote:
I have a Lieder Box on GABY. The carb heat is actuated with a pushrod from the back of the box. The hole was sealed off with a rubber boot, but the rubber is rotten.

Any leads for a replacement boot? Or are we closing off this hole with a grommet now?

D


Hi Dick,

I have that style box also... used a grommet. It’s worked well for 27 years.

Page 3 of 3 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/