Thorp Air Command - T18.net http://thorp18.com/thorpforum/ |
|
Intakes http://thorp18.com/thorpforum/viewtopic.php?f=35&t=6383 |
Page 3 of 3 |
Author: | t18joe [ Mon Nov 21, 2011 8:06 pm ] |
Post subject: | Intakes |
Your carb heat install looks intersting. What rpm drop or temp rise do you get during your engine runup? Thanks N633GG |
Author: | dickwolff [ Fri Nov 03, 2017 6:24 am ] |
Post subject: | Re: Intakes |
I have a Lieder Box on GABY. The carb heat is actuated with a pushrod from the back of the box. The hole was sealed off with a rubber boot, but the rubber is rotten. Any leads for a replacement boot? Or are we closing off this hole with a grommet now? D |
Author: | jrevens [ Fri Nov 03, 2017 11:46 am ] |
Post subject: | Re: Intakes |
dickwolff wrote: I have a Lieder Box on GABY. The carb heat is actuated with a pushrod from the back of the box. The hole was sealed off with a rubber boot, but the rubber is rotten. Any leads for a replacement boot? Or are we closing off this hole with a grommet now? D Hi Dick, I have that style box also... used a grommet. It’s worked well for 27 years. |
Page 3 of 3 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |