Thanks Lee.... do I understand correctly. ...
its just a suction cup holding the arm on the panel...
it seems destined to fail and fall to the cabin floor..
Any pictures?
| Thorp Air Command - T18.net http://thorp18.com/thorpforum/ |
|
| tablet mount http://thorp18.com/thorpforum/viewtopic.php?f=30&t=7615 |
Page 1 of 1 |
| Author: | Tim Brown [ Fri Jul 18, 2014 10:40 am ] |
| Post subject: | tablet mount |
I just ordered a nexus 7 to replace my phone for running naviator in the airplane.. i was Velcroing the phone to the panel but the nexus is bigger and heavier. .. i would like a mount that attaches to the panel... Who's using what? Thanks |
|
| Author: | leewwalton [ Fri Jul 18, 2014 3:23 pm ] |
| Post subject: | Re: tablet mount |
Here's what I'm using Tim ... http://www.rammount.com/NewProducts/Goo ... fault.aspx |
|
| Author: | Tim Brown [ Sat Jul 19, 2014 7:22 am ] |
| Post subject: | Re: tablet mount |
Thanks Lee.... do I understand correctly. ... its just a suction cup holding the arm on the panel... it seems destined to fail and fall to the cabin floor.. Any pictures? |
|
| Author: | leewwalton [ Sat Jul 19, 2014 8:21 am ] |
| Post subject: | Re: tablet mount |
Tim, That's a RAM mount ... they offer numerous attach methods, take your pic. Mine is mounted to the panel with 4 MS and nutplates. Lee |
|
| Author: | Tim Brown [ Sat Jul 19, 2014 11:49 am ] |
| Post subject: | Re: tablet mount |
Roger.... checking again... Thanks |
|
| Author: | bcabebe [ Sun Jul 20, 2014 3:21 pm ] |
| Post subject: | Re: tablet mount |
I have a Nexus 7 (2nd edition 2013). I printed a two piece, slide on case and put "velcro" on the back of each piece. Then I cut and bent aluminum, mounted those pieces to the panel and put "velcro" in the appropriate spots. I slide the case on to the tablet and then press the tablet & case into place on the mount. The "velcro" is actually a Scotch brand All Weather Fastener that I bought at Target. It's a little tricky to get the tablet & case back off the mount, you just have to go slow and be patient.   
|
|
| Author: | Bill Williams [ Sun Jul 20, 2014 3:51 pm ] |
| Post subject: | Re: tablet mount |
I used a tablet mount like the one on Ebay Item 390890612043. I removed the suction cup, using a 10-32 screw mounted it to the panel. Hplds my Samsung Tab 7" great. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|