Thorp Air Command - T18.net http://thorp18.com/thorpforum/ |
|
Flap construction http://thorp18.com/thorpforum/viewtopic.php?f=3&t=8085 |
Page 2 of 2 |
Author: | rhartmaier [ Sat May 20, 2017 7:54 am ] |
Post subject: | Re: Flap construction |
It just occurred to me that if I use .020 for the skins, and .050 for the strip, I get the same dimension as the aileron T.E. I did not realize what a genius I am! |
Author: | bfinney [ Sat May 20, 2017 12:26 pm ] |
Post subject: | Re: Flap construction |
It wasn't early, it was 9:30 PM local (west coast). The flaps are spring loaded up so they could potentially flutter given the right conditions (not enough spring tension for one). Any movable surface has the potential to flutter. |
Author: | rhartmaier [ Sat May 20, 2017 6:56 pm ] |
Post subject: | Re: Flap construction |
Thanks for the comment. Good point..... |
Author: | James Grahn [ Sat May 20, 2017 10:56 pm ] |
Post subject: | Re: Flap construction |
.020 skins are fine. .016 is still available but extremely hard to work with. Please use the correct trailing edge strip size. Cubes |
Author: | rhartmaier [ Mon May 22, 2017 7:35 am ] |
Post subject: | Re: Flap construction |
Cubes, Thanks for the advice. I will go to the airport and cut two .040 T.E. strips today. Bob |
Page 2 of 2 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |