Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Wed Feb 21, 2018 9:35 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 30 posts ]  Go to page Previous  1, 2
Author Message
fytrplt
 Post subject: Re: Retrofit Pitot Tube
PostPosted: Sun Dec 03, 2017 8:23 pm 
Sr. Member
Sr. Member
User avatar

Joined: Tue Oct 20, 2009 8:07 pm
Posts: 774
Images: 2
Location: Lakeland, Florida, USA
My Piper pitot blade installation.

Inside wing showing beef up plate.
Image

Up is forward. Tape is on rivet line.
Image

Another view.
Image

_________________
Bob Highley
N711SH
SN 835
KLAL


Top
 Profile Personal album  
 
James Grahn
 Post subject: Re: Retrofit Pitot Tube
PostPosted: Sun Dec 03, 2017 9:18 pm 
Sr. Member
Sr. Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 933
Images: 0
Location: USA
Thorp Central sells Thorp wheel pants.
Cubes


Top
 Profile Personal album  
 
Jeff J
 Post subject: Re: Retrofit Pitot Tube
PostPosted: Mon Dec 04, 2017 6:40 am 
Sr. Member
Sr. Member

Joined: Wed Aug 31, 2016 8:18 am
Posts: 288
Images: 0
Location: eastern OK
fytrplt wrote:
My Piper pitot blade installation.


Thanks for posting the pictures. Very helpful.


Cubes, you will be my first call when I when I start looking for wheel pants.

_________________
"The joke in aviation is, 'If you want to make a million, you'd better start with £10m.' " -Bruce Dickinson


Top
 Profile Personal album  
 
TonyNZ
 Post subject: Re: Retrofit Pitot Tube
PostPosted: Mon Dec 04, 2017 8:14 pm 
Jr. Member
Jr. Member
User avatar

Joined: Thu Oct 22, 2009 10:25 pm
Posts: 56
Images: 8
Location: New Zealand
Jeff finally got some pics for you. Pretty much the same as Bob's. The external location is in the same place proportionally as would be found on early Cherokee hershy bar wing. A simple folded bracket rivited to the rib and an access panel if you don't have one close by. Hope the pics are attched OK.
Tony S
ZK-VMS
Image

Image

Image

Image


Top
 Profile Personal album  
 
Jeff J
 Post subject: Re: Retrofit Pitot Tube
PostPosted: Tue Dec 05, 2017 1:10 pm 
Sr. Member
Sr. Member

Joined: Wed Aug 31, 2016 8:18 am
Posts: 288
Images: 0
Location: eastern OK
More good pictures. Thanks Tony.

_________________
"The joke in aviation is, 'If you want to make a million, you'd better start with £10m.' " -Bruce Dickinson


Top
 Profile Personal album  
 
Binder
 Post subject: Re: Retrofit Pitot Tube
PostPosted: Sat Dec 09, 2017 11:23 am 
Sr. Member
Sr. Member

Joined: Thu Sep 01, 2016 10:50 pm
Posts: 192
Thanks to both of you for the pics! Those are very helpful. Looks like quite a bit of work for existing aircraft.

Is there a source for those access panel mounts? I like how it's recessed. I'll have to put one of those in and most likely use cherry max to secure the mount to the rib as a river gun will not fit inside a competed wing. Might just be easier to use the solid piping and axel clamps on the last wing rib.

Cubes, I'll check the thorp central page for the wheel pants. Thanks!


Top
 Profile  
 
TonyNZ
 Post subject: Re: Retrofit Pitot Tube
PostPosted: Mon Dec 11, 2017 11:37 pm 
Jr. Member
Jr. Member
User avatar

Joined: Thu Oct 22, 2009 10:25 pm
Posts: 56
Images: 8
Location: New Zealand
Hi Jeff
Sat down and sketched this which hopefully will explain how I did my access panels.
Cheers
Tony


Attachments:
Wing Panel.docx [33.41 KiB]
Downloaded 45 times
Top
 Profile Personal album  
 
Binder
 Post subject: Re: Retrofit Pitot Tube
PostPosted: Wed Dec 13, 2017 8:09 am 
Sr. Member
Sr. Member

Joined: Thu Sep 01, 2016 10:50 pm
Posts: 192
Thanks tony!

I think a bigger challenge will be finding a way to secure the pitot mount inside the competed wing. Rivet gun won't fit so maybe cherry max rivets?


Top
 Profile  
 
fytrplt
 Post subject: Re: Retrofit Pitot Tube
PostPosted: Wed Dec 13, 2017 10:58 am 
Sr. Member
Sr. Member
User avatar

Joined: Tue Oct 20, 2009 8:07 pm
Posts: 774
Images: 2
Location: Lakeland, Florida, USA
How about construction grade epoxy? I have used JB Weld on such.

_________________
Bob Highley
N711SH
SN 835
KLAL


Top
 Profile Personal album  
 
Bill Williams
 Post subject: Re: Retrofit Pitot Tube
PostPosted: Wed Dec 13, 2017 12:50 pm 
Sr. Member
Sr. Member

Joined: Thu Oct 22, 2009 6:26 am
Posts: 742
Images: 0
Location: USA
The auto industry uses "panel bond" to glue fenders etc. on car when repairing sheet metal. Available from auto body supply. It works!


Top
 Profile Personal album  
 
Jeff J
 Post subject: Re: Retrofit Pitot Tube
PostPosted: Wed Dec 13, 2017 6:35 pm 
Sr. Member
Sr. Member

Joined: Wed Aug 31, 2016 8:18 am
Posts: 288
Images: 0
Location: eastern OK
Binder wrote:
Is there a source for those access panel mounts? I like how it's recessed...!


Your Cherokee should have some examples you could copy. Cubes may have something he could sell you or one of the salvage yards may have some mount rings with panels if you prefer not to make them yourself. You can have them check panel thickness before you buy so you know it will be flush.

_________________
"The joke in aviation is, 'If you want to make a million, you'd better start with £10m.' " -Bruce Dickinson


Top
 Profile Personal album  
 
James Grahn
 Post subject: Re: Retrofit Pitot Tube
PostPosted: Wed Dec 13, 2017 9:58 pm 
Sr. Member
Sr. Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 933
Images: 0
Location: USA
We do have access panels and mount rings that are generally used for the wing access to Aileron bellcranks.
Cubes


Top
 Profile Personal album  
 
Binder
 Post subject: Re: Retrofit Pitot Tube
PostPosted: Thu Dec 14, 2017 9:07 pm 
Sr. Member
Sr. Member

Joined: Thu Sep 01, 2016 10:50 pm
Posts: 192
James Grahn wrote:
We do have access panels and mount rings that are generally used for the wing access to Aileron bellcranks.
Cubes


Awesome. So much awesome help from this forum. Ok, it might be spring before I tackle this change. At that point I think purchasing from cubes would be the easiest on those access panels. The bonding glue sounds like the way to go as well.


Top
 Profile  
 
Rich Brazell
 Post subject: Re: Retrofit Pitot Tube
PostPosted: Thu Dec 14, 2017 9:36 pm 
Hero Member
Hero Member

Joined: Wed Oct 21, 2009 12:33 pm
Posts: 2807
Images: 64
Location: Jamul, CA (San Diego area)
Cubes : Are those access panels "flush mount ?" ::)

RB O0


Top
 Profile Personal album  
 
James Grahn
 Post subject: Re: Retrofit Pitot Tube
PostPosted: Sat Dec 16, 2017 11:12 am 
Sr. Member
Sr. Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 933
Images: 0
Location: USA
Yes.
Cubes


Top
 Profile Personal album  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 30 posts ]  Go to page Previous  1, 2

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

[ Time : 0.102s | 16 Queries | GZIP : On ]