Thorp Air Command - T18.net
http://thorp18.com/thorpforum/

Corrosion Control
http://thorp18.com/thorpforum/viewtopic.php?f=29&t=8135
Page 1 of 1

Author:  fytrplt [ Sat Aug 19, 2017 12:28 pm ]
Post subject:  Corrosion Control

I've got my instrument panel out for ADSB update. Found some corrosion on dash and other basic fuselage parts . Question is: ACF-50 or Corrosionx?

Author:  1albee [ Sun Aug 20, 2017 7:10 am ]
Post subject:  Re: Corrosion Control

Corrosion X is thicker viscosity that stays in place longer. ACF - 50 is much thinner viscosity and creeps more into lap seems but does not last as long, if you use it as recommended you may find it coming out of seems / joints for a while.

Phil
118BC

Author:  Rich Brazell [ Sun Aug 20, 2017 11:29 am ]
Post subject:  Re: Corrosion Control

I like stuff getting into my cracks and crevices ! ??? I would prefer corrosion treatment to get between the sheets as much as possible . ::) It's the stuff you can't see that leads to bigger problems .

RB O0

Author:  Rich Brazell [ Fri Aug 25, 2017 9:43 pm ]
Post subject:  Re: Corrosion Control

August Sport Aviation has a good article on corrosion control and what to apply . ::)

RB O0

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/