Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Thu Mar 28, 2024 11:46 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
Jeff J
 Post subject: Cracked bulkhead
PostPosted: Fri Dec 28, 2018 12:07 pm 
Sr. Member
Sr. Member

Joined: Wed Aug 31, 2016 8:18 am
Posts: 583
Images: 0
Location: eastern OK
I don’t know how long it’s been there. I just happened to notice it today when I pulled the left seat. The repair will be a standard stop drill and scab patch but I am curious if a crack like this is unique to this airplane. Thanks


Attachments:
image.jpg
image.jpg [ 1.82 MiB | Viewed 9182 times ]

_________________
Thorp T18
O-320-B3B (160 HP)
68x74 Sterba Propeller

"The joke in aviation is, 'If you want to make a million, you'd better start with £10m.' " -Bruce Dickinson
Top
 Profile Personal album  
 
Ryan Allen
 Post subject: Re: Cracked bulkhead
PostPosted: Fri Dec 28, 2018 5:02 pm 
Hero Member
Hero Member
User avatar

Joined: Wed Oct 21, 2009 6:10 pm
Posts: 1105
Images: 0
Location: Louisiana
I haven't heard of this being a common crack, but hopefully you will get input from those with more Thorp knowledge than me.


Top
 Profile Personal album  
 
Jeff J
 Post subject: Re: Cracked bulkhead
PostPosted: Fri Dec 28, 2018 11:01 pm 
Sr. Member
Sr. Member

Joined: Wed Aug 31, 2016 8:18 am
Posts: 583
Images: 0
Location: eastern OK
Looking at drawing 505, it looks to me like I am missing a backplate.

_________________
Thorp T18
O-320-B3B (160 HP)
68x74 Sterba Propeller

"The joke in aviation is, 'If you want to make a million, you'd better start with £10m.' " -Bruce Dickinson


Top
 Profile Personal album  
 
jrevens
 Post subject: Re: Cracked bulkhead
PostPosted: Sat Dec 29, 2018 1:51 pm 
Sr. Member
Sr. Member
User avatar

Joined: Thu Oct 22, 2009 10:13 pm
Posts: 789
Location: USA
Looks like it may have started at a rivet hole? Might be due to poor fabrication technique... improper or no deburing of the drilled hole, etc. I haven’t heard of any particular problem in that area, but I’ve seen a lot of variance in the way some builders modify it from the plans. FWIW.

_________________
John Evens
Arvada, Colorado

T-18 N71JE (sold)
Kitfox 7 SS N27JE


Top
 Profile  
 
Jeff J
 Post subject: Re: Cracked bulkhead
PostPosted: Sat Dec 29, 2018 3:23 pm 
Sr. Member
Sr. Member

Joined: Wed Aug 31, 2016 8:18 am
Posts: 583
Images: 0
Location: eastern OK
Omitting the backplate would rob that area of a lot of strength. I don’t know about anyone else but I tend to step on the tunnel to get in and out so I don’t mess up the seats. Here is a picture of the back side (ignore the loose wire, it’s not fully installed yet). It looks like the builder tried to compensate for the missing backplate when it broke at the top.


Attachments:
AA2739E4-6201-40E1-8FF2-235B631C38E9.jpeg
AA2739E4-6201-40E1-8FF2-235B631C38E9.jpeg [ 2.05 MiB | Viewed 9098 times ]

_________________
Thorp T18
O-320-B3B (160 HP)
68x74 Sterba Propeller

"The joke in aviation is, 'If you want to make a million, you'd better start with £10m.' " -Bruce Dickinson
Top
 Profile Personal album  
 
bfinney
 Post subject: Re: Cracked bulkhead
PostPosted: Sat Dec 29, 2018 7:55 pm 
Sr. Member
Sr. Member
User avatar

Joined: Thu Oct 22, 2009 2:24 pm
Posts: 501
Images: 6
Location: Yelm, WA USA
My aircraft does not have a reinforcing plate on the -505 bulkhead, neither does the -505 drawing. Note: my drawings are for a T18CW that came from Lou Sutherland and are modified John Thorp drawings. See attached photo.

My baggage floor is even with the top of the tunnel and has a stringer running full width of the fuselage. My battery box is on the right behind the pass seat.


Attachments:
File comment: Aft side of -505 bulkhead
IMG_1265.JPG
IMG_1265.JPG [ 1.03 MiB | Viewed 9082 times ]

_________________
Bruce Finney
N18JF T-18C #262
Yelm, WA USA
Top
 Profile Personal album  
 
Jeff J
 Post subject: Re: Cracked bulkhead
PostPosted: Sat Dec 29, 2018 9:32 pm 
Sr. Member
Sr. Member

Joined: Wed Aug 31, 2016 8:18 am
Posts: 583
Images: 0
Location: eastern OK
Interesting... The S-18 drawing 580 still shows it. I guess he missed erasing it there. If you look close at the 505 drawing for the S-18 you can still see where it was. One of the curved corners didn't get erased and the dimension from the center to the edge is still on it.

I have to patch it anyway so mine will get a 505-4 back plate large enough to repair the cracks. I am putting in a new floor too. The last time I had the forward tunnel out it took me about 3 hours to put it back so I swore I would fix that the next time I had it out. The current floor is 0.016 thick and won't support anything. And to think all of this work started with a simple electric trim upgrade. I really wanted a luggage compartment but repairs are taking all of my free time so I guess that will wait until next winter.

_________________
Thorp T18
O-320-B3B (160 HP)
68x74 Sterba Propeller

"The joke in aviation is, 'If you want to make a million, you'd better start with £10m.' " -Bruce Dickinson


Top
 Profile Personal album  
 
Andy475
 Post subject: Re: Cracked bulkhead
PostPosted: Mon Jan 07, 2019 12:59 pm 
Jr. Member
Jr. Member

Joined: Sat Aug 05, 2017 11:52 pm
Posts: 50
I looked at a thorp for sale that had a similar crack. It looked as if it was caused by luggage.

-Andy


Top
 Profile  
 
Jeff J
 Post subject: Re: Cracked bulkhead
PostPosted: Mon Jan 07, 2019 6:20 pm 
Sr. Member
Sr. Member

Joined: Wed Aug 31, 2016 8:18 am
Posts: 583
Images: 0
Location: eastern OK
Could be. Especially if there is a tunnel back there to transfer the load to the frame. The damage on mine actually starts above the elevator push-pull tube. My baggage compartment consists of what can be seen in the pictures so I doubt luggage could have caused the crack without messing up the push-pull tube or possibly even fouling cables. Mine is certainly a lot stronger now than it was. I took the patch out the same distance on both sides so the load is being carried by a large area when I step on the tunnel instead of just the area immediately around the 1/2 flange.

_________________
Thorp T18
O-320-B3B (160 HP)
68x74 Sterba Propeller

"The joke in aviation is, 'If you want to make a million, you'd better start with £10m.' " -Bruce Dickinson


Top
 Profile Personal album  
 
fytrplt
 Post subject: Re: Cracked bulkhead
PostPosted: Tue Jan 08, 2019 1:45 pm 
Hero Member
Hero Member
User avatar

Joined: Tue Oct 20, 2009 8:07 pm
Posts: 1140
Images: 2
Location: Lakeland, Florida, USA
Image

Image
My fix to weak tunnel.

_________________
Bob Highley
N711SH
SN 835
KLAL


Top
 Profile Personal album  
 
Jeff J
 Post subject: Re: Cracked bulkhead
PostPosted: Tue Jan 08, 2019 10:54 pm 
Sr. Member
Sr. Member

Joined: Wed Aug 31, 2016 8:18 am
Posts: 583
Images: 0
Location: eastern OK
I like that. It looks very strong.

_________________
Thorp T18
O-320-B3B (160 HP)
68x74 Sterba Propeller

"The joke in aviation is, 'If you want to make a million, you'd better start with £10m.' " -Bruce Dickinson


Top
 Profile Personal album  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

[ Time : 0.206s | 14 Queries | GZIP : On ]