Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Thu Mar 28, 2024 10:10 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 14 posts ] 
Author Message
Fraser MacPhee
 Post subject: 594 Bushing Changeout.
PostPosted: Wed Nov 30, 2016 10:54 pm 
Sr. Member
Sr. Member

Joined: Wed Oct 21, 2009 8:57 am
Posts: 722
Images: 19
Location: USA
Most of you seasoned builders will prolly chuckle at this.....

I changed out the 594 stabilator bushings while down in conditional today. Getting the bushings out was easy - getting the bushings greased and pressed in was easy......lining up the holes with a wood dowel pry bar and getting the bolt back in was not too hard, but how to get that nut and washer back on made me think for a minute.

A little 3M spray adhesive on the wrench and the face of the washer kept the nut and washer in the wrench. then just putting a thin piece of metal on the backside of the wrench so the nut won't push out the backside, and sneaking it up under the stabilator into the small opening with the bolt just barely peaking out of the hole, and VOILA!!...easy peasy.....wrenched it on first time both sides....slicker than a cucumber in a Halloween pumpkin!!

Sometimes I amaze myself.......that I can even function as a person, let alone a pilot.


Attachments:
2016 Conditional.jpg
2016 Conditional.jpg [ 70.42 KiB | Viewed 14082 times ]
594 Bushing change.jpg
594 Bushing change.jpg [ 725.87 KiB | Viewed 14082 times ]
594 Bushing Change1.jpg
594 Bushing Change1.jpg [ 137.05 KiB | Viewed 14082 times ]

_________________
Fraser MacPhee
N926WM
Serial #279-1
Angel Fire, NM (KAXX)
Top
 Profile Personal album  
 
jrevens
PostPosted: Wed Nov 30, 2016 11:09 pm 
Sr. Member
Sr. Member
User avatar

Joined: Thu Oct 22, 2009 10:13 pm
Posts: 789
Location: USA
Good goin', Frase! Yep, ya gotta' get resourceful sometimes with these birds. A drop of super glue is sometimes helpful for sticking a nut & washer together, or a nut to a wrench when in a situation like that. I've used a piece of tape on the back of a box end wrench many times also.

_________________
John Evens
Arvada, Colorado

T-18 N71JE (sold)
Kitfox 7 SS N27JE


Top
 Profile  
 
1albee
PostPosted: Thu Dec 01, 2016 7:11 am 
Sr. Member
Sr. Member

Joined: Sat Oct 31, 2015 6:58 pm
Posts: 172
Images: 0
Fraser,
What did you find with your charging system? You were having issues at KVIS.

Phil


Top
 Profile Personal album  
 
Fraser MacPhee
PostPosted: Thu Dec 01, 2016 8:28 am 
Sr. Member
Sr. Member

Joined: Wed Oct 21, 2009 8:57 am
Posts: 722
Images: 19
Location: USA
Phil - I had the wires from the alt to the regulator crossed.

_________________
Fraser MacPhee
N926WM
Serial #279-1
Angel Fire, NM (KAXX)


Top
 Profile Personal album  
 
Rich Brazell
PostPosted: Thu Dec 01, 2016 11:20 am 
Hero Member
Hero Member

Joined: Wed Oct 21, 2009 12:33 pm
Posts: 3095
Images: 64
Location: Jamul, CA (San Diego area)
Good job Mr. Frase ! ::) Now...the world wants to know and needs pics of the Cucumber in a Halloween Pumpkin ! :o

RB O0


Top
 Profile Personal album  
 
1albee
PostPosted: Thu Dec 01, 2016 1:04 pm 
Sr. Member
Sr. Member

Joined: Sat Oct 31, 2015 6:58 pm
Posts: 172
Images: 0
Fraser,
Glad to hear that it was not a big problem.
Phil


Top
 Profile Personal album  
 
ljkrume
PostPosted: Thu Dec 01, 2016 3:18 pm 
Sr. Member
Sr. Member

Joined: Mon Oct 26, 2009 1:33 pm
Posts: 232
Images: 213
Location: USA
Readin your post I was waiting for you to say after all that work you realized you should have used the open-end of the wrench instead of the box-end, and you know what I mean! Some places are really tight; don't ask how I know. But no worries, I don't fly with too many wrenches inside. Ha ha.

Les Krumel,
Albuquerque


Top
 Profile Personal album  
 
Ryan Allen
PostPosted: Thu Dec 01, 2016 8:01 pm 
Hero Member
Hero Member
User avatar

Joined: Wed Oct 21, 2009 6:10 pm
Posts: 1105
Images: 0
Location: Louisiana
Fraser, was there any particular reason you chose to replace the bushings? I'm just trying to make sure I don't overlook something, seeing as how I'm still a new Thorp owner.


Top
 Profile Personal album  
 
Fraser MacPhee
PostPosted: Thu Dec 01, 2016 10:06 pm 
Sr. Member
Sr. Member

Joined: Wed Oct 21, 2009 8:57 am
Posts: 722
Images: 19
Location: USA
Hey Ryan - this plane first flew in 1970, and the stabilator had a little play in it. I measured the vertical play at about 3/8 of an inch on the port side - the starboard side had a little less. I believe John Thorp thought that anything more than 1/4 inch of play at the outboard edge of the stab, and it was time to replace the bushings at the pivot point. It was not really hard at all. Now there is almost no play at all and just feels more solid.

I just passed conditional this evening and my mech says I take better care of this plane than he does his wife. I almost offered my help.......but she wouldn't fit in a Thorp.

_________________
Fraser MacPhee
N926WM
Serial #279-1
Angel Fire, NM (KAXX)


Top
 Profile Personal album  
 
Ryan Allen
PostPosted: Fri Dec 02, 2016 7:42 am 
Hero Member
Hero Member
User avatar

Joined: Wed Oct 21, 2009 6:10 pm
Posts: 1105
Images: 0
Location: Louisiana
Thanks Fraser. that's good info. I just stuffed a young German lady into my Thorp for her first ride.


Top
 Profile Personal album  
 
SHIPCHIEF
PostPosted: Sat Dec 03, 2016 8:16 pm 
Sr. Member
Sr. Member

Joined: Tue Nov 29, 2011 9:05 pm
Posts: 471
Location: USA
Gee Frase;
From your picture, it looks like your plane 'could use a little tail'?? :P
Thanks for the report, my 594 bushings are close to needing the same treatment.
Did you have to remove the vertical stab to do it?

_________________
Scott Emery
EAA Chapter 326
T-18 N18TE


Top
 Profile  
 
Fraser MacPhee
PostPosted: Sun Dec 04, 2016 9:19 am 
Sr. Member
Sr. Member

Joined: Wed Oct 21, 2009 8:57 am
Posts: 722
Images: 19
Location: USA
Scott - yeah - ad to remove the vert stab to wrench on the bolt head. If you have not done it before, it's 5 bolts. (once the rudder is removed). My only advice on those bolts is, look up the torque values and use a torque wrench. It's a lot less torque than you think.

_________________
Fraser MacPhee
N926WM
Serial #279-1
Angel Fire, NM (KAXX)


Top
 Profile Personal album  
 
James Grahn
PostPosted: Sun Dec 04, 2016 7:40 pm 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1434
Images: 0
Location: USA
Good advice Frase. Most torque values will surprise you.
Cubes


Top
 Profile Personal album  
 
stevehawley
PostPosted: Mon Dec 05, 2016 5:23 am 
Jr. Member
Jr. Member

Joined: Tue Mar 02, 2010 2:30 pm
Posts: 86
Location: USA
I have been turning wrenches for over 50 years and have come to the conclusion that most people, including myself, over tighten fasteners. It not only a good practice to use a torque wrench, common sense and safety demand it!
Steve Hawley


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

[ Time : 0.438s | 14 Queries | GZIP : On ]