Thorp Air Command - T18.net • View topic

View unanswered posts | View active topics

Board index » Thorp T-18 » Fuselage & Empennage

All times are UTC - 6 hours [ DST ]

N30WW Update

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

Bill Williams

Post subject: N30WW Update

Posted: Sun Apr 17, 2011 5:09 pm

Spent last week working on the damage to the fuselage. I made new skins and three bulheads thatwere damaged. Bob and I riveted the side skins and two bulkheads today. Will finish up the last bulkhead tommorow , then on to the fin and stabilator.

Image Insert:

Put File Caption Here

Last edited by Bill Williams on Sun Apr 17, 2011 5:09 pm, edited 1 time in total.

Top

Bill Williams

Post subject: N30WW Update

Posted: Fri Apr 22, 2011 3:05 pm

Made a little progress this week, played with the Doc for a couple of days and he put me behind schedule, but the news was good. I manage to cutout and dimple the fin this week. I primed it today and will try and get it riveted together over the weekend. Then on to the horizontal stab.

Image Insert:

Last edited by admin on Fri Apr 22, 2011 3:05 pm, edited 1 time in total.

Top

Rich Brazell

Post subject: N30WW Update

Posted: Fri Apr 22, 2011 4:36 pm

Hero Member

Joined: Wed Oct 21, 2009 12:33 pm
Posts: 3095
Images: 64
Location: Jamul, CA (San Diego area)

This where experience triumphs over beauty. I would be hard pressed to get even 1/4 of this done !

RB

Last edited by admin on Fri Apr 22, 2011 4:36 pm, edited 1 time in total.

Top

Bill Williams

Post subject: N30WW Update

Posted: Mon Apr 25, 2011 4:16 am

Got the fin riveted up over the weekend, now on to the horizontal stabilizer rebuild.

Last edited by admin on Mon Apr 25, 2011 4:16 am, edited 1 time in total.

Top

fytrplt

Post subject: N30WW Update

Posted: Mon Apr 25, 2011 10:41 am

Hero Member

Joined: Tue Oct 20, 2009 8:07 pm
Posts: 1140
Images: 2
Location: Lakeland, Florida, USA

Keep some notes on riveting sequence. We will need them for the next project.

_________________
Bob Highley
N711SH
SN 835
KLAL

Last edited by admin on Mon Apr 25, 2011 10:41 am, edited 1 time in total.

Top

Bill Williams

Post subject: N30WW Update

Posted: Tue Apr 26, 2011 2:12 pm

Felt pretty good today and managed to cut out and cleco the horizontal skin. Need to clean up and dimple and make a tip.

Image Insert:

Put File Caption Here

Last edited by admin on Tue Apr 26, 2011 2:12 pm, edited 1 time in total.

Top

James Grahn

Post subject: N30WW Update

Posted: Wed Apr 27, 2011 1:39 pm

Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1435
Images: 0
Location: USA

Billy,
You are a regular production factory. I guess we need to drop more trucks on you!!!

_________________
Cubes
831GR
Las Vegas

Last edited by admin on Wed Apr 27, 2011 1:39 pm, edited 1 time in total.

Top

Bill Williams

Post subject: N30WW Update

Posted: Sun May 01, 2011 5:25 pm

Finished riveting the horizontal and started fitting the tip. Will get that done tomorrow. Need to connect the trim motor and fine tune the control surfaces. Prime and paint next.....6 weeks until Elizabeth City.

Image Insert:

N30WW horizontal

Last edited by admin on Sun May 01, 2011 5:25 pm, edited 1 time in total.

Top

Page 1 of 1

[ 8 posts ]

Board index » Thorp T-18 » Fuselage & Empennage

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: