(2) for Cubes . Got it .
RB
| Thorp Air Command - T18.net http://thorp18.com/thorpforum/ |
|
| West Coast Spring Fly In 2015 http://thorp18.com/thorpforum/viewtopic.php?f=17&t=7600 |
Page 4 of 4 |
| Author: | irapilot [ Fri Mar 13, 2015 3:23 pm ] |
| Post subject: | Re: West Coast Spring Fly In 2015 |
Hey Jimmy, my apologies for not getting back with you, i was able to make an old spinner work, but thanks for the offer, I'll see you in sadona. Fraser, good to hear your going to try and make it, see ya soon. |
|
| Author: | Rich Brazell [ Fri Mar 13, 2015 3:45 pm ] |
| Post subject: | Re: West Coast Spring Fly In 2015 |
(2) for Cubes . Got it . RB
|
|
| Author: | ljkrume [ Wed Mar 18, 2015 1:17 pm ] |
| Post subject: | Re: West Coast Spring Fly In 2015 |
(2) for Krumel |
|
| Author: | Rich Brazell [ Wed Mar 18, 2015 4:37 pm ] |
| Post subject: | Re: West Coast Spring Fly In 2015 |
(2) for Les . Terry Hagle are you in for the tour ? Mr. Wonderful
|
|
| Author: | Hagle347 [ Thu Mar 26, 2015 1:09 pm ] |
| Post subject: | Re: West Coast Spring Fly In 2015 |
Hi Rich, Right now - No...We arrive in PHX on Thursday - Drive to Sedona on Friday AM. We 'll spend the afternoon in Sedona and head back to PHX late afternoon-ish. All set to fly back east on Sat.am to get ready for Sun N Fun. Hey...Do you have any plans for your trailer (dimensions and stuff) I have to have one made for 66WT. It gets a road trip to St Augustine for DAR signoff and first fight. |
|
| Author: | Rich Brazell [ Thu Mar 26, 2015 5:50 pm ] |
| Post subject: | Re: West Coast Spring Fly In 2015 |
OK Terry . Copy your schedule . I don't have any "plans" for the trailer . Pretty much was done South West Airlines style on a paper napkin . Got the idea for the trailer from a partial photo of Gus Gordon's trailer that he put his S-18 on . If go to my gallery you can see pics of the trailer . The basic trailer is nothing more than a modified flat bed trailer built from the ground up using my pencil diagram . I modified the ramps and replaced the short HEAVY steel ones with a set of aluminum ones off E-Bay . The "outriggers" that hold the wings were also my own design . You may come up with something better ? The trailer is California street legal and has been towed at freeway speeds (55 MPH) . I'll get out in the next day or two and take some measurements of the trailer for you and post them . RB |
|
| Page 4 of 4 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|