Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Thu Mar 28, 2024 6:16 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
denndowning
 Post subject: Avionics Install
PostPosted: Tue Nov 08, 2011 12:14 pm 
Newbie
Newbie

Joined: Wed Aug 10, 2011 7:41 pm
Posts: 30
Location: USA
I'm installing a KX-155 as Comm 1 with a PMA 6000 M/S audio panel in my T-18. The KX-155 has both Comm and Nav Audio Hi and Audio Lo outputs. Does anyone know if the Audio Lo outputs go to ground or to somewhere else? The audio panel does not have Hi and Lo inputs, it just has Comm and Nav 500 ohm inputs.


Last edited by Anonymous on Tue Nov 08, 2011 12:14 pm, edited 1 time in total.

Top
 Profile  
 
leewwalton
 Post subject: Avionics Install
PostPosted: Tue Nov 08, 2011 12:21 pm 
Administrator
Administrator
User avatar

Joined: Tue Oct 20, 2009 4:09 pm
Posts: 1705
Images: 107
Location: Houston, TX
Low is equivalent to ground on the audio panel's side ... I'll get you a pin out.

_________________
Lee Walton
Houston, TX
N51863,N118LW
KEFD


Last edited by Anonymous on Tue Nov 08, 2011 12:21 pm, edited 1 time in total.

Top
 Profile Personal album  
 
leewwalton
 Post subject: Avionics Install
PostPosted: Tue Nov 08, 2011 12:26 pm 
Administrator
Administrator
User avatar

Joined: Tue Oct 20, 2009 4:09 pm
Posts: 1705
Images: 107
Location: Houston, TX
here you go ... looks like COM1 "High" goes to pin 9 and COM1 "Low" ends up at pin 1 which is ground.


Image

_________________
Lee Walton
Houston, TX
N51863,N118LW
KEFD


Last edited by Anonymous on Tue Nov 08, 2011 12:26 pm, edited 1 time in total.

Top
 Profile Personal album  
 
denndowning
 Post subject: Avionics Install
PostPosted: Tue Nov 08, 2011 9:36 pm 
Newbie
Newbie

Joined: Wed Aug 10, 2011 7:41 pm
Posts: 30
Location: USA
Thanks guys. That's exactly what I wanted.


Last edited by Anonymous on Tue Nov 08, 2011 9:36 pm, edited 1 time in total.

Top
 Profile  
 
fytrplt
 Post subject: Avionics Install
PostPosted: Sun Mar 22, 2020 9:28 am 
Hero Member
Hero Member
User avatar

Joined: Tue Oct 20, 2009 8:07 pm
Posts: 1140
Images: 2
Location: Lakeland, Florida, USA
Anyone have a source for pitot and static manifolds? All of the "T's" and tubes under the dash are getting a bit cumbersome. My airspeed indicator, autopilot, and now my transponder all need pitot pressure, while the airspeed, VVI, altimeter, autopilot, and transponder all need connected to the static source. I suppose I could make a couple, but I needn't reinvent the wheel.

_________________
Bob Highley
N711SH
SN 835
KLAL


Top
 Profile Personal album  
 
bfinney
 Post subject: Re: Avionics Install
PostPosted: Sun Mar 22, 2020 12:48 pm 
Sr. Member
Sr. Member
User avatar

Joined: Thu Oct 22, 2009 2:24 pm
Posts: 501
Images: 6
Location: Yelm, WA USA
Bob,
I used 1/4" nylon tube and the quick disconnect fittings from SteinAir https://www.steinair.com/product-category/pitot-static/
Two other suppliers of these fittings: http://www.MettleAir.com and http://www.pneumaticplus.com

The backside of my panel, the red is pitot and the white is static.
Image

enjoy

_________________
Bruce Finney
N18JF T-18C #262
Yelm, WA USA


Top
 Profile Personal album  
 
Ryan Allen
 Post subject: Re: Avionics Install
PostPosted: Sun Mar 22, 2020 1:00 pm 
Hero Member
Hero Member
User avatar

Joined: Wed Oct 21, 2009 6:10 pm
Posts: 1105
Images: 0
Location: Louisiana
Bruce, is your static port routed to you panel or is that your alternate static port?


Top
 Profile Personal album  
 
bfinney
 Post subject: Re: Avionics Install
PostPosted: Sun Mar 22, 2020 1:34 pm 
Sr. Member
Sr. Member
User avatar

Joined: Thu Oct 22, 2009 2:24 pm
Posts: 501
Images: 6
Location: Yelm, WA USA
I have an alternate static port on the panel, it's a pneumatic switch, looks like a normal toggle switch from the front, got it from Stein https://www.steinair.com/product/pitot-static-toggle-switch/. My normal static ports are on the aft fuselage.

_________________
Bruce Finney
N18JF T-18C #262
Yelm, WA USA


Top
 Profile Personal album  
 
Jeff J
 Post subject: Re: Avionics Install
PostPosted: Sun Mar 22, 2020 2:53 pm 
Sr. Member
Sr. Member

Joined: Wed Aug 31, 2016 8:18 am
Posts: 583
Images: 0
Location: eastern OK
I bought my tubing and push connectors at the local hardware store.

_________________
Thorp T18
O-320-B3B (160 HP)
68x74 Sterba Propeller

"The joke in aviation is, 'If you want to make a million, you'd better start with £10m.' " -Bruce Dickinson


Top
 Profile Personal album  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron

[ Time : 0.433s | 15 Queries | GZIP : On ]