Thorp Air Command - T18.net
http://thorp18.com/thorpforum/

Stainless steel "TED" transponder antenna
http://thorp18.com/thorpforum/viewtopic.php?f=13&t=7829
Page 1 of 1

Author:  Rich Brazell [ Mon Sep 07, 2015 5:05 pm ]
Post subject:  Stainless steel "TED" transponder antenna

During my last 24 month x-pondr check it was noted that the stainless steel antenna had a bit of "corrosion"/crude on it that was interfering with the ground test . It would only "test" if the probe for the test box was rotated around the antenna to find a sweet spot . We cleaned it with a 3M pad and now checks good on deck ! Something you might want to consider before your next test is to clean the thing with a scotch brite pad .

RB O0

Author:  Ryan Allen [ Mon Sep 07, 2015 7:31 pm ]
Post subject:  Re: Stainless steel "TED" transponder antenna

good tip. my xpnder check is tomorrow.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/