Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Thu Mar 28, 2024 10:12 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
rrobut
 Post subject: Centre wing spar cap
PostPosted: Wed Jul 15, 2020 5:36 am 
Newbie
Newbie

Joined: Sat Nov 30, 2013 7:08 pm
Posts: 22
Location: Brisbane
On the S 18, Drawing number 227 states that 1 cap 2x2x0.25 2014 T6 channel is required.
The drawing seems to show that it is 1.25x2x1.35x0.25.
Alcoa Die 892

I am a little confused as to the actual size that is to be ordered.


Top
 Profile  
 
James Grahn
 Post subject: Re: Centre wing spar cap
PostPosted: Wed Jul 15, 2020 1:04 pm 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1434
Images: 0
Location: USA
It is a machined piece. That’s why you see different dimensions.
Cubes


Top
 Profile Personal album  
 
rrobut
 Post subject: Re: Centre wing spar cap
PostPosted: Fri Jul 17, 2020 6:45 am 
Newbie
Newbie

Joined: Sat Nov 30, 2013 7:08 pm
Posts: 22
Location: Brisbane
Thanks Cubes for the prompt reply.
So it starts as a 2x2x2x.25 channel and both legs are machined to about 1.25. The outer one at the fitting end tapered.
Both machined full length to the reduced dimension
Rob


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

[ Time : 0.140s | 14 Queries | GZIP : On ]